The kitchen continues

The final support panel for the left side kitchen bench was finished and taken to Clarabelle where I had a bit of a play arranging the bits.

The end support panel completed at home ready for the trip out to Clarabelle. This is a laminated construction around a piece of 12mm ply with Silky Oak trim. On this side a piece of 18mm ply has been added below the height of the bench top thus providing a ledge for the bench top to sit on and a flush inner surface for the dishwasher compartment. This panel stands around 300mm above the bench top dividing the kitchen from where the potbelly stove will eventually go.

Up at Clarabelle the last support panel and the next one just standing in place for a test fit. Here you can see how the end panel will extend above the bench top and the cavity for the dishwasher will be created below.

A rather awkward shot showing all four bench support panels in place but note that, at present, only the second one has actually been fixed. Fixing the other three is next weekend's job!